Harris-Cuttyhunk-marine-light-upgrade

Since 1977 the Harris Cuttyhunk marine boats have been a popular choice among commercial fisherman. Our customer Eddie is a commercial fisherman in Massachusetts and he needed to upgrade the rear halogen lights on his 27 foot Harris Cuttyhunk.

Why you need LED Lights for your Harris Cuttyhunk

The rear of the Harris Cuttyhunk can come equipped with one or two halogen lights that are used to illuminate the Stern side of the boat. In the early morning hours these lights are great for safely moving around while getting all the fishing gear in place before you head-out for the day. However, Eddie noticed the standard halogen lights have become dull and wasn't performing like they used to so he new it was time for a LED light upgrade for his Harris Cuttyhunk.

Best Harris Cuttyhunk LED Lights

Eddie went with two, Aurora 6 Inch Marine LED Lights These Harris Cuttyhunk light bars produces a combined 10,272 lumens and comes equipped with a combination beam pattern. The combination beam pattern utilizes both flood and spot optics to give you a beam that goes both far and wide.

aurora boat light bar 6 inch

These light bar also features the following:

  • IP69 rated housing is constructed of high quality 6063 aluminum and then mated with UV & Scratch resistant GE Lexan lens.
  • Fueled by powerful Cree LED's that can push the beam over 2,000 feet into the darkness ahead. 
  • To ensure an impenetrable seal the boat light bar is then sealed together with 316 stainless steel screws inserted every 1.5" of surface area which makes it durable enough for the most extreme boating conditions.
  • The PCBA (Printed Circuit Board Assembly) is engineered with unique temperature protection, voltage protection and current protection designs to maximize efficiency and increase durability. This unique design means no electromagnetic interference with other nearby electronics on your vessel.
  • The boat light bar is equipped with a special breather apparatus that is uniquely designed to prevent condensation and water intrusion. 
  • Outdoor Dupont painting coats the boat light bar housing, guaranteeing the housing will remain unchanged for 5 years.

What comes with the Harris Cuttyhunk LED Lights

  • One 6 Inch Boat Light Bar with Female Deutsch Connector
  • Two Mounts
  • One Deluxe Wiring Harness - The Aurora wiring harness consist of an on/off switch with LED indicator light, in-line fuse, 12v40A relay, and all the wiring you need for professional installation.

Installing Harris Cuttyhunk LED Lights

Our customer went with one, 6 Inch marine light on each side of vessel instead of doing one big light bar in the center. 

Harris-cuttyhunk-27-foot-aurora-6-inch-marine-light-bar-article

Aurora Marine Lights Installed Harris Cuttyhunk

Harris-cuttyhunk-27-foot-aurora-6-inch-marine-light-bar-on-and-off

Get these lights today!

Aurora 6 Inch Harris CuttyHunk Marine Lights

Still have questions about which is the best LED lighting for your Harris Cuttyhunk?

Feel free to reach out to us by any of the methods listed below:

Phone: 484-513-7746 (Call or Text)

Email: support@offbrandproducts.com

Online Chat: Click the Chat button to be connected with a representative

Boat deck lightsBoat led lightsBuying guideHarris cuttyhunkMarine led lights

Leave a comment

All comments are moderated before being published